TITAN V3 EXPERT
TITAN V3 EXPERT
Color may vary slightly depending on batch
Free express shipping
Free express shipping
Free express shipping via courier on all orders over 250 USD
Shipping & Returns
Shipping & Returns
Destination | Express shipping via Fedex/UPS | Polish National Postal Service |
Europe | 2-7 business days | 1-2 weeks |
Asia | 2-5 business days | not available |
US/Canada | 2-3 business days | not available |
Australia | 3-4 business days | not available |
*Please note that the above delivery times may be extended due to custom duty procedure.
1. The Goods purchased in the Online Store are delivered worldwide, subject to territorial restrictions under applicable laws.
2. The Goods are delivered via specialised courier companies or Poczta Polska (the Polish national postal operator). In some cases, the Goods may be personally collected from the Seller’s registered office, and in the case of the Goods that represent digital content – they may be downloaded on an appropriate device.
3. The Goods are shipped within 1 to 3 (one to three) business days from payment booking. In some cases, the Goods can be shipped at a later date. This applies also to the Goods sold in advance (pre-sale). In such a case, the Seller shall inform the Client about a shipment date. An approximate shipment delivery date depends on a delivery method selected and a destination country, and is specified at order placement. When selecting a transfer payment option, the delivery time indicated on the Website shall be increased by time needed to credit the Client’s entire payment to the Seller’s bank account, usually 1-2 (one to two) business days. Further, in the case of countries outside the European Union, due to distance and potential customs controls the delivery time may be prolonged up to 5 weeks.
4. Detailed delivery method information is available in the Online Store in a Cart section of the given Product.
5. The Goods are shipped to an address specified in an order form or provided by phone or by e-mail. The Seller shall promptly inform the Client about the fact that an order form has been filled in incorrectly if this prevents or delays the conclusion of the Sales Agreement or the delivery of the Goods.
6. Prior to the acceptance of shipment from a postal or a courier service, packaging should be checked for any potential damage inflicted in transport. In particular, the condition of tapes or seals placed on the shipment shall be verified. If shipment package shows any signs of damage or if the seals (tapes) are removed, the shipment shall not be accepted, a damage report shall be prepared in the presence of a courier and the Seller shall be contacted as soon as possible in order to clarify the issue. If discrepancies in terms of shipment quantity or quality are not detected at the acceptance, this might adversely affect the resolution of the Client’s claims filed due to shipment damage or theft in transport.
7. In the case of the Goods that represent the firmware upgrade of devices distributed by the Seller (digital content), the Client, upon the placement of the Order, conclusion of the Sales Agreement and payment, shall connect to a GATE CONTROL STATION desktop application via a USB-Link or Blu-Link device and install the upgrade purchased.
-
-
-
TITAN V3 is an AEG Control System for V3 gearboxes which will transform your airsoft replica into advanced training equipment. Adjust your AEG and check the Statistics using a USB-Link or Blu-Link and GATE Control Station for PC, macOS, iOS, and Android devices. TITAN V3 enables you to adjust trigger sensitivity with military precision. The innovative proximity trigger sensor gives you up to 300 possible sensitivity settings. Gain a tactical advantage thanks to the extremely fast trigger response and many other useful functions. Give your AEG a new lease of life! TITAN is not just another drop-in mosfet. It is the complex system that turns your AEG into an advanced training system.
SPECIFICATIONS
-
Supply Voltage Range
3.75-17 V
Current Consumption
22 mA
Low Power Mode
320 µA
Dimensions (Length x Width x Height)
79.0 x 25.8 x 13.5 mm
Finished Product Weight
28.2 g
Operating Temperature Range
min. -15°C max. + 50°C
Relative Humidity
≤ 80%
-
Connect your TITAN with the GCS App and get total control of your AEG:
- Control your airsoft gun from your iOS, Android, macOS or Windows device
- Set trigger sensitivity exactly as you like and adjust other TITAN settings in a simple way
- Use automatic Pre-Cocking to gain a trigger reaction just like in a real gun
- Try out ROF control, magazine simulation, and other functions
- Update and upgrade Firmware
- Check BB counters and telemetric data
- Perform diagnostics and send reports
- Virtual STATUS for smartwatches and smartphones
- Bolt Catch and magazine sensors for a realistic reload sequence
-
Download GCS App
GCS APP
ASTER and GCS App give you total control of your AEG. ㅤ
ㅤ
The GCS offers you the option to:
• Control your airsoft gun from a smartphone with Android, iOS and PC with Windows or macOS
• Get real-time data from your smartwatch (with Wear OS or watchOS) to reinforce your tactical decisions and get the advantage necessary to win
• No more surprises with an empty magazine or a discharged battery
• Easily adjust the ASTER settings during the game
• Update and upgrade firmware
• View the BB counters, electrical measurements, and statistics
• Perform diagnostics and send reports
• Get the latest news from GATE Enterprise
ㅤ
-
FEATURES
PROXIMITY TRIGGER SENSOR
Thanks to the precise proximity sensor you can set trigger sensitivity with military precision. Depending on trigger construction, it enables up to 300 possible sensitivity settings. You do not have to disassemble your AEG. Just use the GATE Control Station App and adjust the trigger to your preferences and level of skills.
SELECTOR MODES
Two selector sensors allow you to take advantage of hundreds of selector mode variations, depending on firmware edition. The following modes are available for selection*:
SAFE – prevents your replica from firing, even if the safety lever is removed
SEMI – allows you to fire one shot per one trigger pull
BINARY – allows for firing one shot on the trigger pull and another shot upon release
BURST – enables you to shoot a predetermined number of BBs, which is very useful in MilSims and when using low-caps; there are 2 BURST Modes available:
- Full – a burst is shot in full, even if the trigger is released before the preset number of BBs has been shot
- Interruptible – the burst can be interrupted by releasing the trigger earlier - when the trigger is released, the shooting stops even if not all the BBs from the burst have been shot
BURST/AUTO – available in Full BURST Mode only; allows for extending a burst by any number of shots – if you hold the trigger after the burst is shot, it switches to AUTO Mode
AUTO – shots are fired as long as the trigger is pulled
SEMI RAMPING – if you pull the trigger very fast, it switches to AUTO Mode
Please note: In the case of Regional Lock, only SEMI Mode is available. Check law restrictions in your country.
2-STAGE TRIGGER
Enables you to set two different trigger sensitivities. Pulling the trigger slightly produces SEMI or BURST fire. Pulling it further produces BURST or AUTO fire. Select your sensitivity preferences for each stage.
PRE-COCKING
Victory in the game is often a matter of fractions of seconds. Thanks to pre-cocking, you gain trigger reaction similar to a real replica. This allows for initial spring compression, which speeds up trigger response significantly.
There are two Pre-Cocking Modes:
- AUTO Mode – the spring is automatically compressed after each shot—you choose the level of pre-cocking from the list (percentages or levels)
- MANUAL Mode – set the pre-cocking values yourself—instead of percentages there are time settings, you have to choose the time for yourself by trial and error
*Now Pre-Cocking is fully operational in SEMI, BURST, and AUTO Modes
Please note: using Pre-Cocking increases wear and tear on the gearbox.
MAGAZINE
This feature allows for simulating magazines of lower capacity than actually used. Depending on Firmware Edition, allows you to set a simulation of magazine capacity from 1 BB up to 250 BBs. Even if you have a high-capacity magazine, this function lets you truly increase the realism of your game by imitating that your magazine is real-cap. Then, after a predetermined number of BBs is shot, you will have to wait for a previously defined amount of time before the next shot can be fired as if you were really replacing an empty magazine with a full one. You can also set Low Ammo Warning.
SERIES SAFETY LIMIT
Enables to set a predefined number of BBs fired in a single series. It can be used as protection against trigger jams. In case of emergency, you can stop the series by switching the selector position.
*Works only if ROF is decreased using the power settings of ROF control.
SNIPER DELAY
It lets you set the delay between shots or series to simulate the delay from reload or recoil. You can set the delay to 0.01-5 s.
SMART TRIGGER
We know how vital fast trigger response during combat is. That's why we've developed the Smart Trigger function, which enables you to achieve faster trigger response. It works with the ROF Control System. During the first shot, the microprocessor sets the ROF control to 100%. After the first shot, it switches to a previously programmed value (e.g. 50%). As a consequence, the first shot is fired at a full ROF and subsequent shots at a reduced ROF. The best results can be achieved when using a battery with above standard voltage. For example, if you’re using a 7.4 V battery, you can replace it with a 11.1 V one. This way, you will achieve faster trigger response with the same rate of fire than with a standard battery.
ROF CONTROL
ROF Control enables the reduction of a replica’s rate of fire. You can use stronger batteries and still have the ROF exactly as you like. Depending on firmware edition, you can choose between Adaptive, Manual PWM, Manual Delay, and Manual Delay + PWM.
Adaptive – set your desired rate of fire; the brake and delay will be automatically adjusted to achieve this value
Manual PWM – set the motor power throughout the duration of the shot
Manual Delay – set the exact delay between shots in milliseconds
Manual Delay + PWM – set braking power and delay manually
BATTERY PROTECTION & WARNINGS
Protection against battery over-discharge. Modern LiPo and LiFe batteries are very sensitive to over-discharge. If you do not want to damage the battery and you care about its service life, this protection is indispensable. The microprocessor is constantly monitoring battery voltage. When voltage drops to a critical level, it will not allow firing. The number of battery cells can be detected automatically.
LOW BATTERY WARNING
When battery voltage drops to a predefined level, the motor will vibrate at regular intervals. The user is warned 5 times before the battery is discharged. Each warning is communicated by 3 vibrations: HIGH → MID → HIGH.
ACTIVE BRAKE
Thanks to the gear sensor, TITAN precisely detects where the cycle finishes. So, even the shortest trigger action produces at least one full cycle. The optical sector gear sensor counts each tooth of the gear, making it possible to use a broad range of gears: DSG, SSG, 19-tooth, and standard ones. You can select the cycle manually.
EQUALIZER
You don't need to fully release the trigger to fire the next shot. This option is really useful when the trigger sensitivity level is very high. Choose between two types of equalizer.
- OFF - to fire the next shot, you need to release the trigger until it reaches the selected trigger sensitivity level.
- 2LVL - to fire the next shot, just release the trigger until it moves over two adjoining sensors.
- 1LVL - to fire the next shot, just release the trigger until it moves over an adjoining sensor.
CYCLE DETECTION
Thanks to the gear sensor, TITAN V2 precisely detects where the cycle finishes. So, even the shortest trigger action produces at least one full cycle. The optical sector gear sensor counts each tooth of the gear, making it possible to use a broad range of gears: DSG, SSG, 19-tooth, and standard ones. You can select the cycle manually.
Thanks to the cycle detection function you get:
AUTOMATIC BURST
You don't need to set the burst time—you can set the burst between 2 and 10 shots
AUTOMATIC Pre-Cocking
Pre-Cocking is fully operational in SEMI, BURST, and AUTO modes and there's no need to set the Pre-Cocking boost manually; you can simply set Pre-Cocking as high, mid or low
FULL CYCLE
When Pre-Cocking is off, TITAN V2 ensures that the gearbox completes a full cycle and you gain more reliability
NOTIFICATION SETTINGS
You can enable or disable information and warning vibrations, and make your gun stealthy.
DIAGNOSTICS
This feature allows you to troubleshoot your AEG in case of any issue. Errors are communicated once they occur, and their description can be found in the GCS App.
FIRMWARE UPDATE
GCS allows for making firmware updates via the internet, which enables you to quickly apply changes, improvements, and bugfixes.
SMART FUSE
The Smart Fuse protects your AEG’s battery, motor, and controller, even in case of reverse battery connection. A combination of current, voltage, and temperature measurements makes your AEG installation highly reliable. It protects the MOSFET against overheating, overloading, and short-circuiting. If your airsoft gun gets jammed, this function protects the motor and battery against damage.
USER PROFILES
3 profiles available – profile switching via selector
MOSFET
Do you want to achieve a higher ROF and faster trigger response? Are you planning a power upgrade of your gun? In this case, you need a MOSFET.
It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts. As a result, you gain a higher ROF of the gun and faster trigger response.
BUILT-IN SELF-TEST
This allows you to quickly check whether the drop-in module is working properly. It helps to locate where the problem lies when anything goes wrong.
COATING
Thanks to its special conformal coating, our product is resistant to atmospheric conditions (Military Specification MIL-V-173C).
What makes TITAN V3 so special?
-
- User-friendly configuration via the GATE Control Station App
- Firmware updates via the internet enabling improvements
- Proximity trigger sensor offering you even 250 possible sensitivity settings
- Innovative optical sensors instead of mechanical switches that can be prone to faults
- Access to the Statistics and Telemetry
- Replicates trigger response like in real life
- Compatible with DSG, SSG and 19-tooth gears
- Compatible with most V3 gearboxes (including CNC ones) on the market without any modification
- Compatible with most powerful AEG replicas
-
-
GATE HELP CENTER
Browse Manuals, FAQs, and get instant help with technical issues, warranty claims, and order enquiries.
Discover our ecosystem
-
TITAN
Transform your AEG into a computerized training system and gain a unique tactical advantage thanks to extremely fast trigger response—just like in real life.
-
ASTER
The younger brother of the well-known TITAN. Designed to achieve maximum reliability at an attractive price and destined for most AEGs. ASTER is destined for most builds.
-
STATUS
Get data in real-time directly from the STATUS screen to reinforce your tactical decisions. No more surprises with an empty magazine or a discharged battery.
-
GCS APP
GATE Control Station is a free universal app for configuring, controlling, and connecting the GATE Ecosystem elements such as the TITAN, ASTER and STATUS.
-
VIRTUAL STATUS SMARTPHONE
Virtual STATUS functions in your smartphone. No more surprises with an empty magazine or battery.
-
VIRTUAL STATUS SMARTWATCH
GCS App provides essential STATUS functionalities such as the BB counter, magazine counter, and the remaining shots on the battery.
-
BLU-LINK
Blu-Link allows for wireless management of your GATE ETU via the GCS App. You can use an iPhone, Android smartphone or a computer to control your replica with Bluetooth® 5.0.
-
USB-LINK
The USB-Link dongle is used for connecting GATE ETUs with PC, Mac, and Android devices. Working in tandem with the GCS App gives you full access to functions and settings.
You may also like
-
GATE EON CNC Gear Set
Regular price USD 32.90Regular priceUnit price / perUSD 32.90Sale price USD 32.90 -
TACTICKER - realistic trigger system for airsoft replicas
Regular price USD 29.90Regular priceUnit price / perUSD 29.90Sale price USD 29.90 -
PULSAR D Tappet Plate (rev.2)
Regular price USD 27.08Regular priceUnit price / perUSD 27.08Sale price USD 27.08 -
Adjustable Quantum Trigger 2A1
Regular price USD 32.29Regular priceUnit price / perUSD 32.29Sale price USD 32.29