Your ASTER II Bluetooth® is fully compatible with popular brushless motors even 11.1 V batteries.

Predefined number of BBs fired per series, maximum series length limit – should the trigger jam, it will stop shooting on AUTO after firing the set number of BBs.

Thanks to the gear sensor, ASTER V2 SE precisely detects where the cycle finishes. So, even the shortest trigger action produces at least one full cycle. The optical sector gear sensor counts each tooth of the gear, making it possible to use a broad range of gears: DSG, SSG, 19-tooth, and standard ones. In EXPERT Firmware, you can select the cycle manually.

Thanks to the cycle detection function you get:

AUTOMATIC BURST

You don't need to set the burst time—you can set the burst between 2 and 10 shots

AUTOMATIC Pre-Cocking

Pre-Cocking is fully operational in SEMI, BURST, and AUTO modes and there's no need to set the Pre-Cocking boost manually; you can simply set Pre-Cocking as high, mid or low

FULL CYCLE

When Pre-Cocking is off, ASTER V2 SE ensures that the gearbox completes a full cycle and you gain more reliability

Elimination of unnecessary wear & increase of gearbox service life – automatic adjustment of braking power and manual configuration from 0-100% with an accuracy of 1%.

Vibrations signaling warnings & information.

Trigger sensitivity adjustment without any limitation – what’s more, you can now use Trigger Reset point (hysteresis).

PRE-COCKING

Automatic spring compression for real life touch & feel – set the pre-cocking power between 0 and 5. Manually configure the pre-cocking time in MANUAL Mode.

There are two Pre–Cocking Modes:

1. AUTO Mode – the spring is automatically compressed after each shot–you choose the level of Pre–Cocking from 0-5
2. MANUAL Mode – set the Pre–Cocking values yourself–instead of levels there are time settings, you have to choose the time for yourself by trial and error

Please note: using Pre–Cocking increases wear and tear on the gearbox.

DE-COCKING

Release of the compressed spring in a short and simple trigger and selector sequence. De-cocking extends spring, piston and gear lifecycle. A good practice is to release the spring after every game with enabled pre-cocking.

Rate of Fire reduction for stronger battery use, automatic brake and delay settings, setting braking power in percentages, delay between shots in milliseconds or braking power & delay manually; adaptive ROF allows you to set a specific ROF and the system will adjust the settings itself to achieve the set ROF.

You don't need to fully release the trigger to fire the next shot. This option is really useful when the trigger sensitivity level is very high. Choose between two types of equalizer.

• OFF - to fire the next shot, you need to release the trigger until it reaches the selected trigger sensitivity level.
• 2LVL - to fire the next shot, just release the trigger until it moves over two adjoining sensors.
• 1LVL - to fire the next shot, just release the trigger until it moves over an adjoining sensor.

Reload or recoil simulation for a more realistic experience.

7 options in each selector position including SAFE, SEMI, BURST, BINARY, BURST/AUTO, AUTO & SEMI RAMPING

SAFE – prevents your replica from firing, even if the safety lever is removed

SEMI – fire one shot per one trigger pull

BINARY – one shot on the trigger pull and another shot upon release 

BURST – shoot a predetermined number of BBs, which is very useful in MilSims and when using low-caps; there are 2 BURST Modes available: 

• Full – a burst is shot in full, even if the trigger is released before the preset number of BBs has been shot
• Interruptible – the burst can be interrupted by releasing the trigger earlier – even if not all the BBs from the burst have been shot the replica stops firing once the trigger has been released

BURST/AUTO – available in Full BURST Mode only; allows for extending a burst by any number of shots – if you hold the trigger after the burst is shot, it switches to AUTO Mode 

AUTO – shots are fired as long as the trigger is pulled

SEMI RAMPING – if you pull the trigger very fast, it switches to AUTO Mode

Please note: In the case of Regional Lock, only SEMI Mode is available. Check law restrictions in your country.

Simulates magazine capacity and magazine reload. Allows you to set the magazine capacity and the time between reloads, allowing you to use a MID-CAP magazine and maintain realism by limiting the capacity, for example, to 30 shots, and setting a pause in shooting for a few seconds, simulating a magazine change.

Airsoft data at your fingertips, including: Voltage, BB Counter, Motor Cycle Counter, Rate of Fire, ROF on SEMI, Trigger Response, and more.

Warnings & errors for instant troubleshooting, including detailed descriptions. Errors are communicated once they occur.

Counts the number of rounds left in the magazine, like in computer games.

Useful tool for calculations.

Real-time data & remote trigger from your smartwatch with Wear OS or watchOS.

I/O functionalities – ability to connect two input/output devices: bolt-catch sensor, magazine sensor, external trigger or other compatible I/O device.

• configurable battery protection functionality
• protection against overdischarge
• automatic detection of the number of cells in the battery
• low battery warning
• configurable low battery voltage warning threshold